Motul 8100 X-CLEAN FE 5W30 Fully Synthetic Engine Oil ACEA C2, C3 Dexos 2 5L

MOTUL 8100 X-CLEAN FE 5W-30

Gasoline & Diesel Lubricant – Euro 4, 5 & 6
100% Synthetic – Fuel Economy & DPF Compatible

TYPE OF USE

• Advanced 100% synthetic engine oil designed for modern gasoline and diesel engines.
• Suitable for Euro 4, Euro 5 and Euro 6 engines with DPF (Diesel Particulate Filter) and catalytic converters.
• Designed for applications requiring both:
  • ACEA C3 (high protection, high HTHS ≥ 3.5 mPa.s)
  • ACEA C2 (fuel economy, low HTHS ≥ 2.9 mPa.s)
• Ideal where a fuel economy oil with strong engine protection is required.
• Approved for PSA (Peugeot/Citroën) B71 2290 specification.
• Suitable for a wide range of vehicles including GM, Mercedes-Benz, PSA, VAG group (VW, Audi, Seat, Skoda) and Asian manufacturers.
• Compatible with biofuels including biodiesel (up to B10) and petrol with ethanol (up to E85).
• Always refer to the vehicle handbook before use.

PERFORMANCES

Standards:

• ACEA C2 / C3
• API SN / CF

OEM Approvals:

• GM dexos2®
• Mercedes-Benz MB 229.51

Key benefits:

• Combines fuel economy efficiency with high engine protection
• Mid SAPS formulation protects DPF and emission systems, reducing clogging
• High resistance to oxidation and sludge formation for cleaner engines
• Excellent wear protection and oil film strength at high temperatures
• Stable viscosity ensures reliable performance under load

Advanced technology:

• Reduces internal engine friction for lower fuel consumption and emissions
• Provides strong detergent and dispersant properties for engine cleanliness
• Supports extended drain intervals (as per manufacturer recommendations)
• Protects modern turbocharged engines against stress and deposits

RECOMMENDATIONS

• Follow manufacturer’s recommended drain intervals
• Do not mix with oils that do not meet ACEA C2 or C3 specifications
• Always check the vehicle handbook before use

PROPERTIES

• Viscosity grade: SAE 5W-30
• Density at 20°C: 0.853
• Viscosity at 40°C: 72.9 mm²/s
• Viscosity at 100°C: 12.1 mm²/s
• HTHS viscosity (150°C): 3.5 mPa.s
• Viscosity Index: 163
• Pour point: -33°C / -27°F
• Sulphated Ash: 0.77% wt (Mid SAPS)
• TBN: 7.1 mg KOH/g
• Flash point: 226°C / 439°F